Veratron NavBox Electronic Control Unit - A2C59501979

NavBox Electronic Control Unit

The AcquaLink® NavBox is the core of the AcquaLink® VDO Marine system. It acts as a CPU and signal interface. The NavBox provides a wide range of digital and analog input possibilities. It supports up to four electronic engines (J1939 or NMEA 2000®) or one analog engine. It also features two VDO Marine Sumlog® paddle wheel sensor and one analog VDO Marine Windsensor connections, so legacy VDO Marine products can be used and brought to the digital age.

NavSensor reads following analog data:

• Engine Oil Pressure


• Engine Oil Temperature


• Engine Coolant Temperature


• Transmission Oil Pressure


• Fresh Water, Waste Water and Fuel Level


• Voltage


• Rudder Angle


• Engine Frequency


• Battery Current


• Pyrometer

It also features a NMEA 0183 input and output port as well as a buzzer output. All received data are converted and sent to the NMEA 2000® network and to the VDO Marine Bus. This gateway function allows displaying engine, liquid level, pressure, temperature and other vital information on any compatible display on the NMEA 2000® network or on designed VDO Marine AcquaLink® gauges or TFT Displays.

The configuration of the NavBox can be done by using an AcquaLink® TFT and NavControl or by using the intuitive VDO Marine diagnostic tool.

• Reverse polarity protection


• NMEA 2000® certified


• LED signal status indication


• Aluminum base plate


• Front & rear side protection rating IPX4


• 3x VDO Marine bus lines


• 1x J1939 CAN bus


• 1x NMEA 2000® bus


• 1x VDO Marine Analog Wind Sensor Input


• 2x VDO Marine Sumlog® Inputs


• AMP Super Seal power input


• 26 pin AUX input (analog signals, NMEA 0183)


• Operating temperature range -20°C/+70°C