Raymarine AIS700 Class B AIS with Splitter
Model: E70476
- Full transmit and receive AIS for enhanced situational awareness and safety
- Latest SO-TDMA networking for longer range and faster performance
- Built-in antenna splitter simplifies installation with existing VHF radio antenna
- NMEA2000, NMEA0183, PC and SeaTalkng Compatible
- Software or hardware switchable Silent Mode for enhanced security when needed
The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems.
Specifications
| Evironmental |
| Operating temperature |
-15°C to +55°C |
| Storage temperature |
-20°C to +75°C |
| Water ingress |
IPX6 and IPX7 |
| Humidity |
Up to 93% @ 40°C |
| Power |
| Power Supply |
12v and 24 nominal |
| Power Consumption |
<3W |
| <3W |
3A |
| Load Equivalency Number |
1 LEN |
| RF Specifications |
| DSC Receiver |
Implemented by time sharing with one TDMA receiver |
| Receiver 1 band |
156.025 MHz to 162.025 MHz (in 25KHz steps) |
| Receiver 2 band |
156.025 MHz to 162.025 MHz (in 25KHz steps) |
| Transmitter band |
156.025 MHz to 162.025 MHz (in 25KHz steps) |
| Transmitter specification |
To meet IEC 62287-2 relevant sections |
| Receiver specification |
To meet IEC 62287-2 relevant sections |
| Transceiver specification |
To meet IEC 62287-2 relevant sections |
| GPS receiver |
u-blox MAX-M8W |
| GPS receiver channels |
72 channels |
| GPS Cold start acquisition time |
26s nominal |
| Positional source |
GPS & GLONASS |
| AIS performance |
5W SOTDMA |
| External Connection |
| VHF antenna connector type |
SO-239 co-axial |
| VHF radio connector type |
SO-239 co-axial |
| GNSS antenna connector |
50 Ohm TNC co-axial |
| NMEA2000 |
DeviceNet male |
| USB |
Micro-B |
| External interface isolation |
NMEA0183 and NMEA 2000 interfaces to incorporate galvanic isolation from power supply as required by the relevant interface specification. |
| NMEA0183 interface 1 (MFD connection) |
NMEA 0183 HS (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). Configurable baud rate. Input to MFD from AIS. |
| NMEA0183 interface 2 (NMEA0183 instrument connection) |
NMEA 0183 (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). 4 wire interface (differential signalling) Configurable baud rate |
| USB interface (PC connection) |
Protocol NMEA 0183 HS (IEC 61162-1) compliant, bi-directional USB port, 38.4 kBaud |
What's in the Box:
- AIS700 Class B AIS Transceiver with built-in VHF antenna splitter
- GNSS (GPS) Antenna
- Power / data cable 2m (6.56 ft)
- VHF Radio cable 1m (3.28 ft)
- DeviceNet to SeaTalkng® adaptor cable 1m (3.28 ft)
- GNSS antenna gasket
- GNSS antenna pole mount
- Unit fixings (4 x No.8x19 self tapping screws)
- M5 nut and washer (grounding)
- Documentation kit
- GNSS antenna fixings (3 x M3x40 stud and thumb nut)
- Software CD
