PropOne Paint Stripper - 200ml | Part No. 2010

Paint Stripper - 200ml

Remove old PropOne coatings from your propellers and running gear with ease using PropOne Paint Stripper and Silicone Remover.

Features:

• Easy application Brush on and it will do the rest!


• Reduce dust and noise Easy removal


• Effectively allows multiple stubborn layers to be removed


• Marine Grade: DCM NMP free*

PropOne Silicone Remover is designed to remove PropOne Clear Coat. It can also be used as a general-purpose silicone remover to remove thin coatings.

PropOne Paint Stripper will remove paints, varnishes, and lacquers. It is primarily to be used with PropOne Silicone Remover for the removal of PropOne Primer Coat.

Do not use on plastic surfaces or resin-impregnated wood fibreboard materials.

For plastics and other delicate surfaces, test a small area first to ensure Silicone Remover Paint Stripper does not affect the underlying substrate.

Application:

• Apply Paint Stripper approximately 2mm thick using a brush or roller


• Leave in contact for at least 15 minutes or until softened


• Scrape off the coating with slight pressure and appropriately dispose of waste. A wire brush, strong scourer, or paint scraping tool is recommended.


• If any coating remains after scraping, apply a second coat.


• Wipe off any remaining residue with an acetone-soaked cloth, then hose down the surface to leave a bright metal surface.

*Does not contain toxic Dichloromethane and N-Methylpyrrolldone

Easily remove old PropOne coatings from your propellers and running gear with the PropOne Paint Stripper. This effective paint and silicone remover is specially formulated for removing paints, varnishes, and lacquers while ensuring a clean surface for your next application. Ideal for marine use, PropOne Paint Stripper works seamlessly with the PropOne Silicone Remover for a thorough cleaning experience.

Designed for ease of use, simply brush on the Paint Stripper and let it do the hard work for you. With its marine-grade formulation that is free of toxic Dichloromethane and N-Methylpyrrolidone, you can trust that you are using a safe product. Just apply a layer of approximately 2mm thick, wait for at least 15 minutes, and then scrape off the softened coating with a suitable tool. For any remaining residue, a second coat may be necessary, followed by a wipe down with an acetone-soaked cloth.

Please note that PropOne Paint Stripper should not be used on plastic surfaces or resin-impregnated wood fibreboard materials. Always test a small area first on delicate surfaces to ensure compatibility. Experience the convenience and efficiency of PropOne Paint Stripper for your next project.

Features:
* Easy application: Brush on and it will do the rest!
* Reduce dust and noise: Easy removal
* Effectively removes multiple stubborn layers
* Marine Grade: DCM and NMP free