Leland Maximum Inflation Re-Arm Kit V85000-86121Z for 38G Auto Life Jackets
Couldn't load pickup availability
Re-Arm Kit F 38G Auto 3/8 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with 3/8 threads, one green pin, a bobbin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Auto/Manual Pull PFD devices with V85000 Series Inflator
- Includes one 38-gram CO2 cylinder with 3/8 threads, one Green Indicator Pin, Yellow Bobbin/Water Sensing Element, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Enhance the safety and longevity of your inflatable life jacket with the Leland Maximum Inflation Re-Arm Kit V85000-86121Z. This essential re-arming kit includes everything you need to restore your auto/manual pull PFD devices to full functionality. It features a 38-gram CO2 cylinder with 3/8-inch threads, a green indicator pin, a yellow bobbin for water sensing, and comprehensive re-arming instructions to guide you through the process.
The Leland Re-Arm Kit is specifically designed for use with V85000 Series Inflators, ensuring compatibility and safety. Each kit is UL Marine Classified, providing you with peace of mind while you enjoy your time on the water. Remember, this product can only be used once, so it's crucial to replace the gas cylinder after activation to maintain the integrity of your life vest. Always follow the manufacturer's guidelines for safe and effective use, and ensure the product matches your specific life jacket model.
Features:
* For re-arming inflatable life vests: For re-arming inflatable life vests
* Compatible with Auto/Manual Pull PFD devices using V85000 Series Inflator: Compatible with Auto/Manual Pull PFD devices using V85000 Series Inflator
* Includes one 38-gram CO2 cylinder with 3/8-inch threads, green indicator pin, yellow bobbin, and instructions: Includes one 38-gram CO2 cylinder with 3/8-inch threads, green indicator pin, yellow bobbin, and instructions
* UL Marine Classified for safety and reliability: UL Marine Classified for safety and reliability
