Leland Maximum Inflation Re-Arm Kit C 33G Manual 1/2" Threads - Part #840AMU-85202Z
Couldn't load pickup availability
Re-Arm Kit C 33G Manual 1/2 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 33-gram CO2 cylinder with 1/2 threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong rearming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Manual Pull PFD devices
- Do not use with self-inflating PFD
- Includes one 33-gram CO2 cylinder with 1/2 threads, one Green Indicator Pin, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Extend the life of your inflatable life jacket with the Leland Maximum Inflation Re-Arm Kit C 33G, designed specifically for use with manual pull personal flotation devices. This essential kit includes a 33-gram CO2 cylinder with 1/2" threads, a green indicator pin, and comprehensive re-arming instructions. It's crucial to ensure compatibility with your inflatable life jacket's owner's manual before use, as using the incorrect re-arming kit can pose safety risks.
Featuring UL Marine Classification, this re-arm kit is built for reliability and safety. Remember, once the CO2 cartridge is activated to inflate your vest, it must be replaced to maintain its effectiveness. The kit is designed exclusively for manual pull devices and should not be used with self-inflating PFDs. Always adhere to the safety guidelines provided to ensure optimal performance and safety in your aquatic adventures.
Features:
* For re-arming inflatable life vests: For re-arming inflatable life vests
* Compatible with Manual Pull PFD devices: Compatible with Manual Pull PFD devices
* Not suitable for use with self-inflating PFDs: Not suitable for use with self-inflating PFDs
* Includes one 33-gram CO2 cylinder with 1/2" threads, one Green Indicator Pin, and Instructions: Includes one 33-gram CO2 cylinder with 1/2" threads, one Green Indicator Pin, and Instructions
* UL Marine Classified for safety and reliability: UL Marine Classified for safety and reliability