JL Audio MVi Marine Amplifier 5 Channel Full-Range 700 Watts 12v Integrated DSP
98650
Model: MV700/5i
5-Channel Class D Marine System Amplifier with Integrated DSP, 75 W x 4 @ 4 ohms + 300 W x 1 @ 2 ohms - 14.4V
Engineered to deliver reference-grade audio performance in marine environments, every MVi amplifier unites our cutting-edge NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.
Equipped with our second-generation NexD2™ technology, the MV700/5i is capable of powering a complete marine audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms, while also powering a subwoofer with up to 300W @ 2 ohms. Bridging the main channels transforms it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 300W @ 2 ohms on the subwoofer channel.
The NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2™ technology. The amplifier chassis is a ultra-compact, cast alloy design with marine-grade powder coat finish and corrosion-resistant hardware.
Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN® Software application installed.
USA Limited Warranty: Two (2) years from the original date of purchase
Specifications
Rated Continuous (RMS) Power @ 14.4 V
Main Channels @ 4 ohms
75 W RMS x 4
Main Channels @ 2 ohms
100 W RMS x 4
Main Channels - Bridged @ 4 ohms
200 W RMS x 2
Subwoofer Channel @ 4 ohms
180 W RMS x 1
Subwoofer Channel @ 3 ohms
240 W RMS x 1
Subwoofer Channel @ 2 ohms
300 W RMS x 1
Subwoofer Channel @ 1.5 ohms
N/A
Rated Continuous (RMS) Power @ 12.5 V
Main Channels @ 4 ohms
60 W RMS x 4
Main Channels @ 2 ohms
90 W RMS x 4
Main Channels - Bridged @ 4 ohms
180 W RMS x 2
Subwoofer Channel @ 4 ohms
180 W RMS x 1
Subwoofer Channel @ 3 ohms
240 W RMS x 1
Subwoofer Channel @ 2 ohms
300 W RMS x 1
Subwoofer Channel @ 1.5 ohms
N/A
General Specifications
Frequency Response (Main Channels)
12 Hz - 24 kHz (+0, -1dB)
Frequency Response (Subwoofer Channel)
12 Hz - 1 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels)
99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to highest rated power (Analog Inputs - Subwoofer Channel)
99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Analog Inputs - Main Channels)
80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Analog Inputs - Subwoofer Channel)
72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 ohms
>150 / 50 Hz
Damping Factor @ 2 ohms
>50 / 50 Hz
THD+N @ Rated Power (Main Channels)
<1% @ 2 ohms per Ch.
THD+N @ Rated Power (Subwoofer Channels)
<1% @ 2 ohms per Ch.
Input Voltage Range @ RCA Inputs
250 mV - 16 V RMS
Min.Copper Power / Ground Wire Gauge
4 AWG wire
Fuse Rating
60 A (AFS, AGU or MaxiFuse™)
IP Rating
IPX2 (when mounted vertically with connections pointed downward)
Physical Specifications
Height
2.05 in / 52 mm
Width
13.96 in / 355 mm
Depth
6.93 in / 176 mm
Net Weight
5.6 lb / 2.54 kg
What's in the Box:
- MV700/5i Amplifier
- Power Connector (for 4 AWG wire)
- Speaker Output Harnesses (2)
- Subwoofer Output Harness
- 6 ft A/B USB Cable
